Revision 1 80 9/10/2019
5.7.3.3 Exporting Data
A variety of data export formats are provided by the GUI. To access a list of formats, right
click on the archive data table. The formats are listed below:
• Load From File - loads a previously saved proprietary data file (.dcar).
• Save to File - saves the data to a Galvanic proprietary format (.dcar).
• Save as Packet CSV - Saves the archive data for the displayed tab as a CSV file.
• Save as Legal CSV - Saves the archive data for all tabs as a CSV file.
• Save as XLS - saves the data to a Microsoft Excel File
• Copy Selection to Clipboard - allows the user to copy a selection from the data table to the
clipboard to be pasted into another program (e.g. Microsoft Excel).
• Copy Image to Clipboard - copies an image of the table to the clipboard that can be pasted
into an image-editing program or into a Microsoft Word document.
• Hide Selected Column(s) - hides one or more selected columns. If a table is exported to a
Microsoft Excel file while columns are hidden, those hidden columns will NOT be exported
to the file.
• Unhide All Columns - displays any columns of data that may have been previously hidden.
5.7.3.4 Log Setup
If desired, the analyst can format the log in a different manner than the default log (Figure
5-10). To configure the analyzer to log values in data points other than those set up at the
factory, press the Log Setup button at the top of the Archive tab to present the Log
Configuration dialog box (Figure 5-15).
To Next Page
Loading...
