Galvanic Applied Sciences ProTech903W - 4.6 The Alarms Page

Revision 1 53 9/10/2019
4.6 The ALARMS Page
If F2 is selected from the main screen, a list of all alarms is presented (e.g. Off-line). The
Alarm LED will be lit when an alarm condition has been detected. The possible alarms are
listed in Table 4-5. A detailed discussion of the various alarms is presented in Section 5.6.
Table 4-5: Alarms
General System Alarms
High Temperature Alarm
Low temperature Alarm
Sensor LED Current
RTC Battery
Max Tape Advance Alarm
Low Tape Alarm
Tape Length Alarm
Tape Movement Alarm
Sensor Calibration Alarm
Bypass
DC Power Alarm
AC Power Alarm
Analog Input Alarms
AI#1 > Limit
AI#1 < Limit
AI#2 > Limit
AI#2 < Limit
AI#3 > Limit
AI#3 < Limit
AI#4 > Limit
AI#4 < Limit
Analysis Alarms - Sample
High Alarm
High High Alarm
Deviation
Lock
Analysis Alarms - Reference 1
High Alarm
High High Alarm
Deviation
Lock
Analysis Alarms -Reference 2
)
High Alarm
High High Alarm
Deviation
Lock
Analysis Alarms – Zero
)
High Alarm
High High Alarm
Deviation
Lock
Analysis Alarms – Calibration
)
High Alarm
High High Alarm
Deviation
Lock