Revision 1 166 9/10/2019
Section 11 Technical Specifications
11.1 Performance Specifications
0-2000 ppm w/out dilution (consult factory) -
100% w/ dilution
0-1 ppm or less (consult factory)
Linearity ±1% of full scale
< 20 sec to alarm; 3 min to 90%
Time Depends on range and gas
concentration.
Cycle time is user configurable; typical 4 min.
11.2 Functions
One includes: Sample analysis run, zero run,
reference1 run, reference2 run, calibration run
Each stream can have separate calibration
coefficient and range of measurement.
Please consult factory for details
5-14 weeks, depending on application.
Typical tape life given 3 minute cycle time is
5 weeks. Can be extended to as much 3
months at low concentration.
AUTO mode: analyzer runs in predefined
sequence.
MANUAL mode: user can force any stream to
To Next Page
Loading...