190-01115-01 G3X™/G3X Touch™ Avionics Installation Manual
Rev. AV Page 21-6
The Engine inputs being monitored are displayed as gauges on the EIS display (Figure 21-1) and also on
the MFD Engine Page.
Figure 21-1 EIS Display (Engine Bar)
The following list of gauges, (if configured) are specifically required by FAR 91.205 and will always be
displayed on the EIS display (engine bar). Other gauges will be displayed as space permits based on a pre-
defined priority and user selections.
RPM Oil Temperature Oil Pressure
Fuel Quantity
Turbine Inlet /
Outlet /
Interstage
Temperature
(TIT/TOT/ITT)
Type K thermocouple N/A
Table 21-1 Compatible Engine/Airframe Input Sensors
SENSOR TYPE
COMPATIBLE
SENSORS
GARMIN PART
NUMBER*
NOTES
*Items with a Garmin part number may be included in a G3X Sensor Kit (Section 21.2), and are available
individually from Garmin Dealers
To Next Page
