Garmin G3X - Page 903

190-01115-01 G3X™/G3X Touch™ Avionics Installation Manual
Rev. AV Page H-53
11. Engage the autopilot and verify it can be overpowered in both the pitch and roll axis. If the
autopilot cannot be overpowered, use the Autopilot Setup screen to reduce the MAX TORQUE
setting for the associated servo.
a) Press MENU two times on the GDU to enter the MAIN MENU page.
b) Select the SYSTEM SETUP page.
c) Select the AUTOPILOT page.
d) Select ROLL SERVO and set the MAX TORQUE.
e) Select PITCH SERVO and set the MAX TORQUE.