Revision B 120 Series Maternal/Fetal Monitor 2-3
2015590-001
Introduction: Series Overview
Series Overview
The Model 126 Monitor
The Model 126 Monitor provides standard fetal monitoring parameters—dual
ultrasound, fetal ECG, and uterine activity. The Model 126 has the following
features:
Dual ultrasonic heart rate monitoring allows for non-invasive monitoring of
twins.
A +20 BPM heart rate offset option is provided for the secondary heart rate
(HR2) trend, when using dual ultrasound, or ultrasound and direct FECG, to
separate overlapping FHR trends for easy interpretation.
A heartbeat coincidence detection feature can be enabled to inform you when
there is the possibility that you may be monitoring a duplicate signal.
The electroluminescent (EL) display, with circularly polarized filter, removes
glare; its wide viewing angle provides easy viewing at a distance.
The strip chart recorder is a quiet, easy-to-load, high-resolution thermal array
printer. The recorder prints continuous trends and alphanumeric data on one
strip chart.
User-selectable font size for strip chart annotations customizes readability.
Automatic mode selection is provided simply by inserting the appropriate
transducer plug into the front panel receptacle.
The ChartLight allows the room lights to be dimmed without sacrificing
visibility of the strip chart recorder.
Transducer connectors are easy-to-use, color-coded, and durable.
Frequently used functions are controlled by your choice of front panel monitor
buttons—audio volume, UA reference, alarm silence, event mark, record, and
paper advance.
System setup options are easily accessed via a front panel Trim Knob control.
Fetal parameters are continuously displayed even during configuration of
system setup options.
Annotations from an optional Model 2116B Keyboard are printed on the strip
chart recorder paper.
The ultrasound mode provides clean accurate traces with few “dropouts”
because of Corometrics’ patented autocorrelation processing.
Fetal heart rate alarm limits are user-defined, with pre-set defaults. Signal
quality has no user-defined parameters.
Alarm limits are easily configured via setup screens.
Alarm silencing is controlled by a front panel monitor button which is brightly
colored for easy recognition.
To Next Page
Loading...
Need help?
General
