Revision B 120 Series Maternal/Fetal Monitor 8-17
2015590-001
Self-Tests: Corolan Address Check
Corolan Address Check
The Diagnostic Control service mode screen provides an indication of whether a
monitor is connected to a Corolan network and if so, provides the wallplate address.
If the monitor is not connected to a Corolan network, or if there is a wallplate
address error and the monitor is automatically taken offline, the message
NO
ADDRESS
appears at the bottom left of the screen.
If the monitor is connected to a Corolan network, the wallplate address is identified
in the bottom left of the screen.
To Next Page
Loading...
