Revision B 120 Series Maternal/Fetal Monitor 2-5
2015590-001
Introduction: Series Overview
The Model 128 Monitor
The Model 128 Monitor provides all of the features of the Model 126 Monitor with
the addition of integrated maternal pulse oximetry and non-invasive blood pressure
monitoring, plus the following:
Built-in maternal vital signs monitoring eliminates the need for separate blood
pressure and maternal pulse oximetry monitors.
Maternal non-invasive blood pressure
*
readings can be taken on-demand or at
pre-programmed intervals using the well-known DINAMAP blood pressure
technology.
Smart BP option prevents blood pressure readings from occurring during
contractions.
Continuous non-invasive MSpO2 oxygen saturation and maternal pulse rate can
be reliably monitored using the well-known Nellcor pulse oximetry brand.
Continuous display/printing of the maternal pulse rate trend can be enabled.
Maternal alarm limits are user-defined, with pre-set defaults.
The audible indicator for each maternal alarm can be temporarily silenced.
Maternal vital signs storage provides an eight-hour history of the maternal vital
signs in a spreadsheet format. The data can be displayed or printed on-demand.
A maternal-only recording mode is specifically designed for postpartum
monitoring of the mother.
The MSpO2 pulsatile waveform can be optionally displayed and can be
“frozen” on the screen for review. In addition, a six-second “snapshot” can be
printed on the strip chart paper.
*
Blood pressure is not automatically activated. Manual blood pressure readings must be started via a
front panel monitor button or display button. Automatic readings must be initiated via a setup
window.
To Next Page
Loading...
Need help?
General
