2-6 120 Series Maternal/Fetal Monitor Revision B
2015590-001
Introduction: Series Overview
The Model 129 Monitor
The Model 129 has all of the features of the Model 128, plus the following:
Built-in independent MECG monitoring is provided with selection of lead I, II,
or III.
Twins and maternal monitoring can be accomplished simultaneously using dual
ultrasound and MECG; or using ultrasound, FECG, and MECG.
The MECG waveform can be optionally displayed and can be “frozen” on the
screen for review. In addition, a six-second snapshot can be printed on the strip
chart paper.
The large display shows fetal parameters, maternal parameters, and one
waveform all at once.
Upgrading Your Monitor
The 120 Series family of monitors provides one solution for high-risk and low-risk
labors and deliveries. The 120 Series of monitors lets you start with a basic monitor
and add the extended and/or more advanced features later as your clinical needs
increase and your budget allows. Refer to Chapter 12, “Upgrading a 120 Series
Monitor” , for more information.
Adding Fetal Movement Detection
Each monitor in the series can be upgraded to include fetal movement detection
(FMD). Contact your Service Representative for more information.
To Next Page
Loading...
Need help?
General
