GE Senographe DS

GE Healthcare Senographe DS
Revision 1 Service Information and Procedures Class A 2385072-16-8EN
Job Card PHY A030 - Generator and Gantry Disconnection Reconnection
Page no. 489 Chapter 6
JC-PHY-A-030.fm
14. On the Anode Starter Board 300PL2, remove the cable labeled G300-PL2 XP1 2381701 from the XJ2
connector.
15. Remove the cable labeled
G300-PL2 XP1 2381701 from the framework of the Generator by releasing
the clamp (15) that secures it to the framework (4 mm allen wrench).
XJ2
15