GE Senographe DS User Manual

GE Healthcare Senographe DS
Revision 1 Service Information and Procedures Class A 2385072-16-8EN
Job Card ELE A008 - Configuring the 21-inch 3MP Monitor
Page no. 551 Chapter 7
JC-ELE-A-008.fm
The Desktop Manager Configuration Tool appears. Within the Desktop Manager Configuration Tool
you use the cursor keys to move up and down between the different options, and the space bar to
select an option. The currently selected option contains an x within the brackets.
4. At the first kdmconfig page, leave the Xsun server option selected.
Press the F2 key to continue.
5. At the kdmconfig - View and Edit Window System Configuration page that appears, use the cursor
keys to move to the Change Video Device/Monitor option, and press the space bar to select that
option. Press the F2 key to continue.
6. At the kdmconfig - Video Device Selection page that appears, use the cursor keys to move to the
XF86-NV Nvidia Corporation Quadro FX560 option, and press the space bar to select that option.
Press the F2 key to continue.
7. At the kdmconfig - Monitor Type Selection page that appears, use the cursor keys to move to the
MultiFrequency 95kHz (up to 1600x1200 @ 75Hz) option, and press the space bar to select that
option. Press the F2 key to continue.
8. At the kdmconfig - Screen Size Selection page that appears, use the cursor keys to move to the
21-inch (53cm) option, and press the space bar to select that option. Press the F2 key to continue.
9. At the kdmconfig - Resolution/Colors Selection page that appears, use the cursor keys to move to the
2048x1536 256 colors @ *** option, and press the space bar to select that option. Press the F2 key
to continue.
10. At the kdmconfig - View and Edit Window System Configuration page that appears, leave the No
changes needed - Test/Save and Exit option selected. Press the F2 key to continue.
11. At the kdmconfig - Window System Configuration Test page that appears, press the F2 key to run the
screen test.
12. From the test screen that appears, click on:
•Yes, if screen is displayed correctly (buttons and text are readable).
•No, if screen is not displayed correctly and redo steps 5 to 11.
Once the monitor test is successful, and you click Yes you are automatically returned to the com-
mand line.
13. Exit as root user, by entering:
exit
14. Go to section 7-1-3, Expanding the ADS GUI to Fill the Monitor (V3 and V4 Control Stations) on page
552.
7-1-2 Resolution Configuration on V4 Control Stations
The kdmconfig utility will have been peformed during the ADS configuration with the choice of Xorg
server for the graphics management. Unlike the
Xsun server used with the V1/V2/V3 Control Stations,
the Xorg server auto-detects the graphics card within the Z400 Workstation and the monitor connnected
to the Z400 Workstation. Therefore, no additional kdmconfig steps are necessary for the V4 Control Sta-
tion. Simply proceed to section 7-1-3, Expanding the ADS GUI to Fill the Monitor (V3 and V4 Control Sta-
tions) on page 552.

GE Senographe DS Specifications

General

Brand	GE
Model	Senographe DS
Category	Medical Equipment
Language	English