GE Voluson E6

GE HEALTHCARERAFT VOLUSON E8 / VOLUSON E6
D
IRECTION KTD102576, REVISION 7 DRAFT (AUGUST 23, 2012) SERVICE MANUAL
6-10 Section 6-6 - Modification of Keyboard Layout
Section 6-6 Modification of Keyboard Layout (cont’d)
6.) Select the default input language from the drop down menu.
NOTE: If the desired language is not listed, click the ADD
button, choose the desired input language from the
drop down menu, as shown in Figure 6-11 below, and then confirm with OK
.
(The corresponding keyboard layout is shown automatically.).
7.) If not already done, select the default input language from the drop down menu (see: Figure 6-10).
The corresponding keyboard layout is changed automatically.
8.) Click on APPLY
and then close the window with OK.
9.) Close the Service page with the SAVE&EXIT
and restart the system.
10.)Reenter “Keyboard Layout” by repeating step 1.) to step 6.). This time remove unused language(s).
11.)Test the Keyboard function:
- Press the ABC
key on the control panel.
- Press some keys on the keyboard and verify the entered text.
Figure 6-10 Default input language
Figure 6-11 Default Keyboard Settings and Input Locale Properties
default input language
[Add] button
corresponding
keyboard layout
(drop down menu)
[Remove] button
to remove unused
language(s)
corresponding keyboard layout
default input language
(drop down menu)