GRAPHTEC WR300 - Measurement Data Save Destination Settings and Other Settings

5-12
Application Software
Measurement Data Save Destination Settings and Other Settings
The Options window enables you to specify the destination for saving measurement data and to make other
settings.
Click "Options" in "Settings" on the menu bar to display the following window. Set the required details and
click "OK".
Measurement data save destination settings
To set the destination for saving measurement data, click the "Work Folder Settings" tab. The save
destination settings include data file and temporary file settings.
Data File......................... Sets the destination for saving captured data. Click to display the setting
window.
Temporary File ............... Sets the destination for temporarily saving measurement data. Click to display
the setting window.
Misc. settings
For other settings, click the "Misc." tab. This automatically opens the setting file specified when connecting to
the WR300 and sets these setting parameters in the WR300.