5-8
Application Software
(3) Updating the driver
Select the "Driver" tab and click "Update Driver."
(4) Starting the update wizard
"Upgrade Device Driver Wizard" appears. Click "Next."
(5) In the "Install Hardware Device Drivers" window, select "Display a list of the known drivers for this device
so that I can choose a specific driver." under "What do you want the wizard to do?" and click "Next."
(6) In the "Select a Device Driver" window, click "Have Disk."
(7) In the "Locate File" window, browse the CD-ROM, select "USB DRIVER" → "GTCUSBR.INF" and click
"OK."
(8) Return to the "Select a Device Driver" window and click "Next."
(9) In the "Start Device Driver Installation" window, click "Next."
(10) Completing installation
The "Completing the Upgrade Device Driver Wizard" window appears. Click "Finish" to exit the wizard.
Installing OPS023
This section describes how to install the application software and the system setting tools used to set and
control the WR300.
(1) Insert the WR300 User Guide CD-ROM provided into the PC CD-ROM drive, and browse the CD-ROM
contents.
(2) Click the Taskbar's Start button, then click the Run... icon to open the 'Run' window.
(3) Enter the CD-ROM drive name and \English\OPS021\SETUP.EXE as the name of the file you wish to
open. If the disk is in drive D, for example, enter "D:\English\OPS021\SETUP.EXE" in the box to launch
the installer.
(4) Continue, following the instructions on the screen.
CHECKPOINT
Be sure to observe the following points when connecting the WR300 to a PC.
• Do not connect any devices apart from a mouse or a keyboard to any of the other USB terminals on your PC.
• Set the PC's power-saving functions to Off.
• Set the Screen Saver to Off.
• Set the anti-virus software auto update and scan scheduler functions to Off. Also, set the Windows auto update and
scheduler functions to Off.
To Next Page
Loading...