Application Software
5-7
Windows XP: Driver software is already installed.
Updating the USB driver
(1) Opening "Device Manager"
Select "Control Panel" → "System" → "Hardware" tab or right-click "My Computer," select "Properties"
→ "Hardware" tab → "System Properties" window, then click the "Device Manager" button.
(2) In the "Device Manager" window, open "USB (Universal Serial Bus) Controller." Confirm that "Graphtec
WR300" is shown. Right-click it and select "Properties."
(3) Updating the driver
Select the "Driver" tab and click "Update Driver."
(4) Starting the update wizard
The "Hardware Update Wizard" appears. Select "Install from a list or specific location (Advanced)" under
"What do you want the wizard to do?" and click "Next."
(5) In the "Please choose your search and installation options." window, select "Don't search. I will choose
the driver to install." and click "Next."
(6) In the "Select the device driver you want to install for this hardware." window, click "Have Disk."
(7) In the "Locate File" window, browse the CD-ROM, select "USB DRIVER" → "GTCUSBR.INF" and click
"Open."
(8) Return to the "Select the device driver..." window and click "Next."
(9) Installing the driver
Windows XP starts installing the driver. Depending on the OS setting, "The software you are installing
for this hardware has not passed Windows Logo testing to verify its compatibility with Windows XP"
message may appear. Simply click "Continue Anyway."
(10) Completing installation
The "Completing the Hardware Update Wizard" window appears. Click "Finish" to exit the wizard.
Windows 2000: Driver software is to be installed for the first time.
Installing the USB driver
(1) Starting the wizard
Connect the USB cable to the PC and WR300. The "Found New Hardware Wizard" appears.
(2) In the "Found New Hardware Wizard" window, select "Search for a suitable driver for my device
(Recommended)" under "What do you want the wizard to do?" and click "Next."
(3) In the "Locate Driver File" window, select "CD-ROM drive" under "Optional search locations" and click
"Next."
(4) Browse the CD-ROM, select "USB DRIVER" → "GTCUSBR.INF" and click "OK."
(5) "The wizard found a driver" message appears. Click "Next."
(6) Completing installation
The "Completing the Found New Hardware Wizard" window appears. Click "Finish" to exit the wizard.
Windows 2000: Driver software is already installed.
Updating the USB driver
(1) Opening "Device Manager"
Select "Control Panel" → "System" → "Hardware" tab or right-click "My Computer," select "Properties"
→ "Hardware" tab → "System Properties" window and click the "Device Manager" button.
(2) In the "Device Manager" window, open "USB (Universal Serial Bus) Controller." Confirm that "Graphtec
WR300" is shown. Right-click it and select "Properties."
To Next Page
Loading...