Application Software
5-5
Connection Using a USB Cable
Use the USB cable to connect the WR300 to a PC.
USB cable
Connecting the WR300 to a PC directly
When connecting the WR300 to a PC directly, connect using an A-B type cable as shown below.
USB cable (A-B type)
Connecting via a network
When connecting via a network, connect via a USB hub using A-B type cables as shown below.
USB cable
(A-B type)
USB cable
(A-B type)
USB HUB
CHECKPOINT
When connecting via a USB cable, a USB driver must be installed in your computer. Please refer to Section 5.4,
"Installing the Software", for the installation procedure.
To Next Page
Loading...