This chapter describes the installation and measurement
procedures for the WR300 when the OPS023 Application
Software is used.
CHAPTER 5
Application Software
5.1 Procedures from Installation to Measurement
5.2 Software System Requirements
5.3 Connecting to a PC
5.4 Installing the Software
5.5 Setting the IP Address and Device ID
5.6 Menu Configuration and System Settings
5.7 Measurement Parameter Setting Procedures
5.8 Printer Functions
5.9 Measurement/Monitoring Procedures and
Save/Scroll/Cursor Functions
5.10 Opening Captured Data Files and
Saving WR300-Captured Data to a PC
5.11 Converting the Data Format and Saving the Data
5.12 Report Function
5.13 Exiting OPS023
To Next Page
Loading...