FFT Mode
4-11
4.5 REPLAY Menu
(1)(2)(3)(4)(5)
(1) Expanded display (between cursors)
............................. Displays the enlarged waveform between the cursors.
(2) Entire display ............ Returns to the full display of the enlarged waveform in the expanded display.
(3) Overall calculation .... Displays the overall calculation value.
(4) Peak list display ........ Displays the list of peak values. This setting is only available when the Display
format is set to "1 Division", "2 Divisions", or "4 Divisions".
(5) Return to Recorder mode
............................. This parameter is not available when measuring in FFT mode. Select "Return to
Recorder mode" in this window and press the ENTER key to return to Recorder
mode.
CHECKPOINT
• The marks before the setting range for each channel in the channel information identify
whether the captured waveform fits within the scale or is outside the scale.
– Black mark : Data that fits within the scale.
– Red mark : Overscale data
• Return to Recorder mode is only available when FFT mode is entered from the
Recorder mode FFT Calculation function.
To Next Page
Loading...