5-6
Application Software
5.4 Installing the Software
This section describes how to install the USB driver, the system setting tools, and OPS023.
Checking the version of your USB driver (when already installed)
This section describes how to view the version of the USB driver.
(1) Opening "Device Manager."
Select "Control Panel" → "System" → "Hardware" tab or right-click "My Computer," select "Properties"
→ "Hardware" tab → "System Properties" window, then click the "Device Manager" button.
(2) In the "Device Manager" window, open "USB (Universal Serial Bus) Controller." Confirm that "Graphtec
WR300" is shown. Right-click it and select "Properties."
(3) Updating the driver
Select the "Driver" tab and click the "Driver Details" button.
(4) Select [...\GTCUSBR.SYS] to view the version of the driver file.
Installing the USB driver
This section describes how to install the USB driver.
(1) Insert the WR300 User Guide CD-ROM provided into the PC CD-ROM drive.
(2) Connecting the WR300 to the PC
Connect the WR300 to the PC using the USB cable, then turn the power on.
(3) Installing the USB driver
Window XP: Driver software is to be installed for the first time.
Driver software is already installed.
Windows 2000: Driver software is to be installed for the first time.
Driver software is already installed.
Windows XP: Driver software is to be installed for the first time.
Installing the USB driver
(1) Detecting the hardware
Connect the USB cable to the PC and WR300. The "Found New Hardware" message appears.
(2) Starting the wizard
In the "Found New Hardware Wizard" window, select "Install from a list or specific location (Advanced)"
under "What do you want the wizard to do?" and click "Next."
(3) In the "Please choose your search and installation options." window, select "Don't search. I will choose
the driver to install." and click "Next."
(4) In the "Select the device driver you want to install for this hardware." window, click "Have Disk."
(5) In the "Install from Disk" window, browse the CD-ROM under "Copy manufacturer's files from," select
"USB DRIVER" → "GTCUSBR.INF" and click "OK."
(6) In the "Select the device driver..." window, "Graphtec WR300" appears in the "Model" box. Select it and
click "Next."
(7) Installing the driver
Windows XP starts installing the driver.
(8) Completing installation
The "Completing the Found New Hardware Wizard" window appears. Click "Finish" to exit the wizard.
To Next Page
Loading...