This chapter explains how to check the WR300/310's external casing
and accessories, and how to prepare the WR300/310 for operation.
CHAPTER 2
Checks and Preparation
2.1 Checking the Outer Casing
2.2 Checking the Accessories
2.3 WR300/310 Part Names and Functions
2.4 Monitor Part Names and Functions
2.5 Control Panel Part Names and Functions
2.6 Amplifier Part Names and Functions
2.7 Installing or Removing an Amp
2.8 The Printer Units and Compatible Chart Paper
2.9 Loading Chart Paper
2.10 Inserting and Removing a PCMCIA Card
2.11 Connecting the Power Cable and Turning on the Power
2.12 Connecting to a PC
2.13 Remote Functions and Connector Pin Assignments
2.14 Assembling the Remote Connector
2.15 Using the IRIG Terminals (WR310 only)
To Next Page
Loading...