Application Software
5-23
5.8 Printer Functions
The printer functions enable computer control of the WR300 chart speed and output of a hard copy of the
screen.
CHECKPOINT
These functions can only be used when chart paper is loaded in the WR300.
Function ......................... Enables or disables WR300 printer output
OFF: Data is not output to chart paper even if measurement has been initiated.
ON: Data is output to the chart paper as soon as measurement is initiated.
Feed ............................... Selects the length of paper to be fed before the start of recording. Select from 1, 2,
5, 10, 15, or 20 cm.
Screen copy ................... Makes a hard copy of the currently displayed WR300 screen data.
To Next Page
Loading...