Application Software
5-15
(5) New measurements
To start measurements, click "New" in the File menu. A new window is displayed.
(6) Online
To switch online, click "Online" in "Transfer" on the menu bar or click with the mouse.
CHECKPOINT
The WR300 cannot be controlled using this software when in Replay mode.
Synchronizing the Date and Time
The Date and Time Settings window enables adjustment of the WR300 date and time to match the PC.
Click "Sync. Date and Time" in "Settings" on the menu bar to display the setting window as shown below. Set
the parameters and click "Sync". (Synchronizes the time for all WR300 units if multiple units are connected.)
PC Date/Time................. Displays the PC time and date setting. This cannot be changed.
Device Settings .............. Sets the WR300 time.
Device Selected ............. Selects the WR300 for setting among those connected over a network.
Date/Time....................... Displays the date and time for the WR300 selected.
To Next Page
Loading...