5-30
Application Software
5.11 Converting the Data Format and Saving the Data
Convert and Save Data
Converted data can be saved by selecting "Convert and Save Data" in "File" on the menu bar, selecting the
directory, and selecting Input File, Format, Format Options, and Data Options.
Input File ........................ Displays the data name specified in "Open".
Format............................ The output file format can be selected from among the following.
• Spreadsheet format ( * .CSV)
........................ Delimits data with commas or CRLF, and encloses comments in double quotation
marks. The default output file name will be the original file name with the extension
changed to "CSV".
• DADiSP format ( * _DADISP.DAT)
........................ Format that can be read in by the "DADiSP" data analysis software. The default
output file name will be the original file name with the extension changed to
"DADISP.DAT".
• Text file format ( * .TXT)
........................ This format can be specified as "Delimiter" or "CRLF" in the format options. The
default output file name will be the original file name with the extension changed to
"TXT".
• GBD format ( *.GBD)
........................ Converts a "GDT" file to a "GBD" file.
Format Options .............. Selects the format details.
• Output Index ........... Selects whether or not to add an index when spreadsheet ( * .CSV) or text file
( * .TXT) formats are selected. Check the box to add an index.
• Sequence Number.. Selects whether or not to add a sequence number when spreadsheet ( * .CSV) or
text file ( * .TXT) formats are selected. Check the box to add a sequence number.
• Delimiter ................. Selects the delimiter character (for separating adjacent data in groups recorded at
the same time) used when text file ( * .TXT) format is selected. The delimiter
character can be a tab, comma, space, or semicolon.
• CRLF ...................... Selects the line-break character (for inserting between data groups recorded at the
same time) used when text file ( * .TXT) format is selected. The line-break
character can be CR&LF, CR, or LF.
Data Options .................. Selects the data options.
• All Data ................... All data displayed is converted.
• Area ........................ Specifies the range to be converted. This is applied when the item checkbox is
checked. Specification is not possible when no files are specified, or for multiple
files. The range can be specified by specifying the start and finish sample points, or
by specifying as a percentage. The two methods are linked, but fractional
percentages cannot be specified. This setting affects the number of sample points
recorded in the output file header.
To Next Page
Loading...