GRAPHTEC WR300 - 6.5 Options;Accessories;Supplies Charts

Specifications
6-11
6.5 Options/Accessories/Supplies Charts
Units
Accessories
Supplies
Unit Model No. Details
Voltage measurement amplifier WR3-V AMP Can be added later
Voltage/temperature measurement amplifier WR3-M AMP Can be added later
DC strain measurement amplifier WR3-DCB AMP Can be added later
Frequency measurement amplifier WR3-FV AMP Can be added later
200-mm long-length Z-fold unit B-522 Can be added later
100-mm internal Z-fold unit B-523 Can be added later
200-mm internal Z-fold unit B-524 Can be added later
12 V DC power supply B-525 Can be added later
Accessories Model No. Details
Input cable (8-cable set) B-331 2-pin cable (banana terminal) bare tips
Input cable (16-cable set) B-335 2-pin cable (banana terminal) bare tips
Power cable (DC) RIC-140 10-pin round connector cable (2 m) x 1
Clamp adapter (1200 A) CM-102
Digital clamp meter CM-111
Logic amplifier probe RIC-07
Alligator clip cable RIC-08
IC clip cable RIC-09
Probe set (Set RIC-07 to 09) RIC-10
Floating voltage input probe CM-105
Voltage conversion probe CM-106
Clamp meter temperature probe RIC-110
Line separator CM-108
Safety adapter SMA-102 High-voltage BNC-to-banana conversion adapter
Supplies Model No. Min. Qty. Details
Roll paper (thermal recording paper) PR230 5 rolls 100-mm wide, 40-m length
Z-fold paper (thermal recording paper) PZ230 5 packs 100-mm wide, 40-m length
Roll paper (thermal recording paper) PR231A 10 rolls 200-mm wide, 40-m length
Z-fold paper (thermal recording paper) PZ233 5 packs 200-mm wide, 40-m length
Z-fold paper (thermal recording paper) PZ231A 5 packs 200-mm wide, 100-m length
Head cleaner B-368 1 set For cleaning the thermal recording head