4-10
FFT Mode
4.4 FFT Mode REPLAY Menu Tree Structure
Menu Item Details
Section
1. Cursor Settings and Cursor Settings Mode Same as Recorder mode Replay Settings 3.16
Cursor Position*
1
[Cursor Settings]
Select
Sync. Mode
2. Search Settings The Search Menu is not displayed in FFT mode.
3. Execute Action Expanded display 4.5
(between cursors)
Entire display
Overall calculation.
Peak list display
Return to Recorder mode Only displayed when FFT calculation is
performed on data measured in Recorder
mode
4. Calculation Functions The calculation menu is not displayed in FFT mode.
5. Amp Settings Not used
6. Memory Settings*
2
Same as the FFT mode's "Memory Settings" 3.3
7. Trigger Settings*
2
Same as the FFT mode's "Trigger Settings" 3.4
8. Record Settings*
2
Same as the FFT mode's "Record Settings" 3.5
9. Data Replay Settings*
2
Same as the FFT mode's "Data Replay Settings" 3.6
10. EU Settings*
2
Same as the FFT mode's "EU Settings" 3.8
*1: Some of the menu contents are the same as those of the RECORDER mode's REPLAY menu. Please refer to Chapter 3, Recorder Mode, for
details. Please note that there are some settings that cannot be made in FFT mode, even if there are explanations provided in Chapter 3.
*2: Some of the menu contents are the same as those of the FFT and RECORDER mode's REPLAY menu. Please refer to Chapter 3, Recorder
Mode, for details. Please note that there are some settings that cannot be made in FFT mode, even if there are explanations provided in
Chapter 3.
To Next Page
Loading...