Recorder Mode
3-29
3.12 Option Settings
(6) (7) (8) (9)
(1)(2)(3)(4)(5)
(1) Screen Saver ............ Turns off the display if the WR300/310 is not operated within the specified interval,
thus prolonging the product life of the display.
CHECKPOINT
Press any key to redisplay the screen.
(2) Background Color ..... Sets the color of the screen background.
(3) Power On Start ......... Initiates measurement as soon as the WR300/310 is turned on.
Disable : Disables the Power On Start function.
Enable : Enables the Power On Start function. When this setting is selected, the
PRINTER submenu appears which is described below.
(4) Printer ....................... Selects whether or not to start printing as soon as the WR300/310 is turned on.
This parameter can only be set when the POWER ON START setting is Enable.
Off : Printing does not start as soon as the WR300/310 is turned on.
On : Printing starts as soon as the WR300/310 is turned on.
(5) Date/Time ................. Displays a submenu for setting the current date and time.
(6) New Line Code ......... Sets the CR+LF/CR/LF.
(7) Device ID .................. Sets the ID number for the WR300/310.
(8) IRIG .......................... Sets the time code (IRIG-B or IRIG-E) when the IRIG function is used.
(9) TCP-IP settings......... Sets the TCP-IP. To change the settings, select "Change Settings". The current
conditions set are displayed below this item. (Settings can only be viewed for
confirmation here, and cannot be changed.)
Change Settings ............ Changes the TCP-IP settings.
IP Address : Sets the IP address.
Subnet Mask : Sets the subnet mask.
Port Number : Sets the port number.
To Next Page
Loading...