Application Software
5-27
Displaying Measured Data on a Dual Screen
Display the cursors on data you have directly measured on the screen. Click "Measure" → "2-screen" on the
menu bar or click to automatically read and display data between the cursors (captured on the WR300).
Displaying Replayed Data on a Dual Screen
Click "Measure" → "Replay" on the menu bar or click and select a file in the WR300. After the selected
file data appears, display two cursors and click "Measure" → "2-screen" on the menu bar or click . The
data (captured on the WR300) is automatically read and displayed.
Using Data Files Captured on a PC
Confirm that the PC and WR300 are disconnected from the network to avoid an error.
A: Files with extension gbd or gdt
Select a file and display the cursors. Click "Measure" → "2-screen" on the menu bar or click to display
data between the cursors.
B: Files with extension gmd
Select a file and display the cursors. Click "Measure" → "2-screen" on the menu bar or click . "The PC
must be connected to the WR300. Do you want to connect to the WR300?" message appears. Click "Yes"
to automatically read out data on the WR300 and display the waveform on the screen.
To Next Page
Loading...