Recorder Mode
3-17
(6) List Print.................... After recording is completed, a list of the WR300/310's currently selected settings
is printed.
(7) Output Mode ............. This parameter selects whether or not to replay data after it has been measured
and saved to memory. It can only be set when the Function setting is Memory.
All Data : Replays all of the captured data.
One Frame : Replays only one frame of the captured data.
No Output : Simply saves the measured data (without replaying it).
CHECKPOINT
This One Frame function can be used most effectively when used in combination with the
Output Ratio function of the MEMORY key's Data Replay Settings window.
To Next Page
Loading...