Recorder Mode
3-23
(b) Meas. Value : Specifies the numeric value(s) to be scaled according to the
Setting Method setting.
• If the Setting Method setting is 4 point setting, set two points (the Upper and
Lower parameters).
• If the Setting Method setting is Offset setting, specify one point (the Meas.
Value parameter).
(c) EU Value : Specifies scaled output, which varies with the Setting Method
setting.
•Specifies two points (the Upper and Lower parameters) if the Setting Method
setting is 4 point setting.
•Specifies one point (the Meas. Value parameter) if the Setting Method setting
is Offset setting.
(d) Dec pt : This parameter specifies the decimal point position of the numeral to
be specified as the EU value(s). (Specified only if the Setting Method setting is
4 point setting.)
(e) Unit : Selects the scaled unit, which can be specified as a user-defined
character string consisting of alphanumerics. This Unit parameter can also be
specified by selecting the Select Unit setting.
(f) Select : Selects the type of engineering unit.
(g) Choose : Selects the scaled unit. The unit displayed here is the type of unit
selected by the Select setting. To specify a unit that is not displayed here,
specify a user-defined character string as the Unit setting. Moreover, the setting
specified here is displayed as the Unit setting.
(h) Span : Selects whether or not to link the specified scaled unit to the SPAN
settings.
Linked : Links the specified scaled unit to the SPAN settings. The method
of linking varies with the Setting Method setting.
•4 point setting :The specified EU Value settings become the
Upper and Lower SPAN settings.
• Offset setting :The SPAN settings are shifted by the offset
specified by the Meas. Value setting.
Do not link : The SPAN settings specified by the Lower-SPAN-Upper settings in
the AMP Settings window take effect.
Upper
setting
Lower
settin
+2.5000 —2.5000
+10.000
Specified scaled unit
EU value setting —10.000
+5 V
CH.1 10V
–5 V
+10.00rpm
1 CH.1 Scaling
-10.00rpm
+20.00rpm
1 CH.1 Scaling
- 20.00rpm
Setting Example
Not Linked
Linked
To Next Page
Loading...