3-38
Recorder Mode
(8) Compensation mode
............................. Sets the compensation mode.
Line: Displays the waveform as a solid line.
Dot : Displays the waveform as a dotted line.
(9) Plot ........................... Switches the specified XY number on or off.
(10) X-Axis, Y-Axis ......... Sets the channels to display for both the X-axis and Y-axis.
Example: For the same X-axes, set all to CH1, then assign required channel
numbers to the Y-axis.
(11) Execute XY Display
............................. Displays the data in XY format when the XY settings have been made.
To Next Page
Loading...