Grundig Digta 7 Push - Adding of Dictation Parts

27
Operating
Control if the overwriting mode is activated. x
The overwriting mode is marked by means
of a line in the progress bar.
If another recording mode is activated, please press the button x
“RecMode”.
A list of possible recording modes appears on the display.
Use the up/down buttons to navigate to the “ x Overwrite” recording
mode and confirm by pressing “OK”.
End your selection with the button “ x Save”.
Overwriting of data
The dictation will be overwritten from the selected dictation position
on.
Start the recording by clicking the » x
g« button. Dictate the modified
text.
The recording indicator lights red.
Recording in the overwriting mode
Stop the recording by pressing the x »e/f« button.
Adding of dictation parts
An additionally recorded text can be added at the end of a recorded
dictation.
Press the button x »
e/f«.
The device turns to recording stop.
Select the desired dictation by using the up-down navigation but- x
tons.
Press the button » x
e/f« again to listen to the dictation.
Press the button x »
« (skip to the end).
Overwriting modee
NOTICE
Overwriting mode