64
Menu functions
Data protection when rechargeable battery is empty
If you do not switch the power source, the Digta will not recognize
when the rechargeable battery is almost empty and can therefore not
save dictations and switch off in time.
Press “ x MENU”.
Use the up/down buttons to navigate to the “ x Device settings” menu
item and confirm using “OK”.
Select the “ x Rechargeable batteries” subitem using the up/down
buttons. Confirm your selection using “OK”.
Move to the desired option using the up/down buttons: x
Batt.Pack962/batteries•
Other recharg. batt.•
Activate the selected power source by pressing “ x OK”.
The marker bullet moves to the highlighted bar. If you have selected x
“Brightness”, the submenu for setting the brightness opens.
Confirm the change using “ x Save”.
Foot control
With the “Foot control” function, you can select the functions of the foot
control* for recording or play-back. You can set whether the foot control
is to be used for transcription* or for hands-free dictation.
The foot control comes preconfigured for hands-free dictation. For
transcription, it first must be switched to “Fast forward” in the “Foot
control/Middle pedal” menu.
Press “ x MENU”.
Use the up/down buttons to navigate to the “ x Device settings” menu
item and confirm using “OK”.
Select the “ x Foot control” subitem using the up/down buttons.
Confirm your selection using “OK”.
Select the desired option using the up/down buttons: x
»Middle pedal«: The pedal can either be used for recording •
(hands-free dictation) or for fast forward (transcription).
»Short rewind«: Here you can set the length of the short rewind •
between 0 and 10 seconds. Each time play-back is started, the
current dictation position is moved backwards by the set amount
of time. This causes the most recent dictation part to be repeated.
NOTICE
Factory settings
To Next Page
Loading...
Need help?
General
