33
Operating
Enter up to 16 characters. x Complete the entry using the “Save” but-
ton.
The numbers/characters are saved. The Digta returns to the details
menu.
If you wish to cancel the entry, press x “Escape”.
In addition to the text editor, the Digta also offers another method for
entering filenames and numbers/references (characters). You can also
use the speech recognition function*:
Spell out your text (letters digits, characters), holding down the x
record button while you are speaking.
Your spoken text is recognized as an entry. The recognized numbers
and characters are displayed in capital letters on the display.
You can speak each digit individually and slowly. However, it is quick-
er and better for the speech recognition if you speak the numbers in
full.
If you have made a mistake in the entry, press the “ x
” button.
You will return to the previous digit and can repeat the entry via
speech recognition.
Dictation ID
The “dictation ID” function is only shown if a scanner has been con-
nected and no data list has been scanned.
In the details menu you can use the dictation ID function to assign addi-
tional data to the dictation, for instance patient or client information.
If patient numbers or file references are administered using barcodes,
the data can associated with the dictations using a scanner without risk
of mixing up entries.
Details can be found in the section “Menu functions/Scanner”.
“Dictation ID” details menu
Press “ x OK”.
The data list functions appear.
Speech recognition of digits
“Dictation ID” feature
Dictation ID
To Next Page
Loading...
Need help?
General
