Grundig Digta 7 Push - Free Configuration of Buttons

81
Possible configurations with the PC software “Digta Configurator”
When the EOL button is pressed, the dictation is locked against the fol-
lowing changes:
Add dictation part in the middle or onto the end•
Delete dictation or dictation part•
Set index•
Add info message•
To make any changes, you must remove the EOL designation for the
current dictation. Do this by pressing the EOL button again (approx.
2 sec).
Free configuration of buttons8.5
You can adjust the configuration of the upper and lower function buttons
to suit your needs* using the Digta Configurator. You can also configure
each button separately for pressing once, pressing longer, or pressing
and holding (only for speech recognition). For the exact options, consult
the current version of the Digta Configurator.
Some examples of free configuration of the buttons include:
Function of the “NEW” button (new dictation) configured to one of the •
function buttons located on the side for user who are left-handed
EOL function configured to the lower side function button to make it •
easier to handle
Activate the priority feature for a dictation using one of the buttons•