3
Introduction
Introduction1.
Your Digta is a digital handheld dictation machine. When used with the
included software, it can be used as a single user station dictation sys-
tem. It can also be integrated into a network (local network with several
authors and transcribers).
Please read the entire operating instruction before usage. Grundig Busi-
ness Systems cannot accept any liability for damages resulting from
non-observance of the operating instruction. Please keep the user man-
ual for future references.
For safety reasons, follow all safety precautions to ensure a safe han-
dling with the device!
Warning! Never open the dictation machine. This voids the warranty. You
may open only the cover for the battery compartment.
The CE mark confirms that the device corresponds to the
relevant guidelines of the European Union..
Scope of supply1.1
Dictation machine Digta 7 Push• DVD with PC-software and doc-•
umentation
USB-cabel• Pouch•
These operating instructions describe how to use the device with acces-
sories as well as how to operate the device using only the standard
scope of delivery. Accessories that are not included in the scope of
delivery are marked with “*”.
1.2 Accessories
For the latest accessories like Digta Card, Digta Station 447, recharge-
able battery pack 962, power supply, foot control, plug-on microphone
and earphone, please visit the Grundig Website on the internet at
www.grundig-gbs.com.
The performance characteristics described by Grundig Business Sys-
tems are only valid when using original accessories released by Grundig
Business Systems. Grundig Business Systems cannot accept liability for
lacks caused through the utilization of accessories which are not Grun-
dig Business Systems genuine accessories. This also applies to acces-
sories which are neither released nor recommended by Grundig Busi-
ness Systems.
Explanation of signalwords and symbols in this 1.3
Operating Instruction
Important notes for your safety are highlighted. Please pay particular
attention to these notes in order to avoid accidences and damages to
the device:
Warnings
Warnings are indicated by symbols. In addition they are introduced with
signal words that express the scope of the hazard.
All instructions must strictly complied with!•
To Next Page
Loading...
