54
Menu functions
Record level display•
The display can be switched off if the pulsing level indicator is dis-
tracting during recording.
Recorder symbols•
This displays the symbols “
g”, “ll”, “i”, “ ”, “h”, “ ”, “e”, “f”,
and “
” on the right side of the screen.
They indicate the current function of the keys and help beginners
operate the keypad. If the recorder symbols are switched off, the
progress bar is longer and can more exactly indicate the dictation
position.
Activate or deactivate the x display option by pressing “OK”.
The check mark after the option appears or disappears. The option is
activated or deactivated.
Confirm the change using “ x Save”.
If you do not wish to save the change, press the “ x Escape” button.
Date and time
In the “Date and time” menu, you can set the current date and time. You
can select the format for the display.
If your Digta is connected via an USB connection to a PC with running
DigtaSoft or AdapterServerConfig, the date and time are automatically
synchronized with the settings on the PC.
You select select whether the day or the month is displayed first in the
date and whether the time is displayed in 12 (am/pm) or 24 hours.
DDMMYYYY 24hr., DDMMYYYY 12hr., MMDDYYYY 24hr., MMDDYYYY
12hr.
Press “ x MENU”.
Use the up/down buttons to navigate to the “ x Screen” menu item and
confirm using “OK”.
Select the “ x Date and time” subitem using the up/down buttons.
Confirm your selection using “OK”.
The setup window for the date and time appears.
Display in “Date and time” menu
You can use the left/right buttons to select the desired entry fields. x
Format for date and time
„Date and time“ menu
To Next Page
Loading...
Need help?
General
