67
Menu functions
If you have made a mistake in the entry, press the “ x ” button.
You will return to the previous digit and can repeat the entry. x
A window appears for entering a new PIN.
Enter the new 4-digit PIN by selecting the digits using the up/down x
buttons and confirming each individual digit by pressing “OK”.
If you have made a mistake in the entry, press the “ x
” button.
You will return to the previous digit and can repeat the entry. x
A prompt for the new PIN appears.
Display during PIN entry
Enter the new PIN again to confirm it. x
The new PIN is saved.
Reset
In the “Reset” menu, you can reset the memory and device settings of
the Digta.
Press “ x MENU”.
Use the up/down buttons to navigate to the “ x Device settings” menu
item and confirm using “OK”.
Select the “ x Reset” subitem using the up/down buttons. Confirm your
selection using “OK”.
Move to the desired option using the up/down buttons. x
»• Format memory«: formats the internal memory or a removable
external memory card. During the formatting process, a busy
indicator appears as a revolving point. A notice appears on the
display when formatting is completed. Confirm by pressing OK.
Directories and files with administrative data are saved in both
the internal and the external memory. Therefore, not all of the
memory capacity is available for recording dictations.
Data loss
Formatting the memory causes all dictations and files to be deleted.
If a list with several authors is installed in the Digta, the function “For-
mat memory” is only available if there are no dictations in the memo-
ry. This prevents dictations from inadvertently being deleted by anoth-
er user.
Change PIN
NOTICE
Formatting with several authors
To Next Page
Loading...
Need help?
General
