82
Operation with Digta Station
Operation with Digta Station9.
The Digta Station* serves as a communication interface between the
dictation machine and the PC, as a charging station and as a base for
the dictation machine. A foot control* and headphones* can be connect-
ed additional to the Digta Station Plus*. Also it is possible to charge a
rechargeable battery pack in a special slot of the Digta Station Plus.
Digta Station
with Digta 7
USB interface9.1
Connecting the device to the PC via the USB interface (yellow indicator
on the Digta Station) sets up a data transfer. A USB audio/HID function
can also be used to dictate in the Grundig PC software or in speech rec-
ognition systems.
Connec-
tions of Digta
Station
9.2 Charging the battery in the battery
compartment of the dictation machine
Connect the USB plug on the power supply cable into the “DC IN 5V” x
socket on the Digta Station*.
Connect the plug of the power supply unit into the wall socket. x
Press and hold “ x MENU” until the device switches off.
Digta Station
Digta Station
To Next Page
Loading...
Need help?
General
