74
Communication with the PC
Communication with the PC7.
Connect/disconnect the dictation machine with 7.1
the PC
Connect dictation machine to the PC
Connect your Digta by means of the USB-cable to your PC in order to x
transfer dictations to your PC and to transmit them to your typist.
The dictation machine must be switched on to enable the communi- x
cation between the two devices.
The Grundig PC software can only be used with one dictation
machine. If a second dictation machine is connected to the USB inter-
face, the PC will not recognize it; it will only appear in Windows as a
removable disk drive.
If automatic USB connection is selected x , USB mode switches on
automatically when a dictation machine that is switched on is con-
nected via USB.
The computer identifies the device as removable disk and as USB
audio/HID device. The Grundig Business System PC-software can be
configurated so that the PC transfers the dictations from the dicta-
tion machine automatically, and transfers them so that the memory
space of the dictation machine is fully available again.
If x automatic USB connection is switched off, set up the connection
manually by selecting the “USB mode” menu item using “OK”.
Data transfer incomplete
Stop the USB connection using the task bar on the PC, as otherwise
the transfer may not be complete.
7.2 USB-operations
USB power supply
The Digta is not recognized as a device by the PC. You can use the Digta
for recording/playback as in battery operation, but the dictation machine
is supplied with power from the PC.
PC file transfer (removable storage device)
If the dictation machine is connected to a PC via a USB cable, the PC
supplies the dictation machine with power. The PC recognizes the
device as a USB removable storage device for transferring dictations/
files to and from the PC.
If automatic USB connection is switched off, set up the connection
manually.
Press “ x MENU”.
PC software
NOTICE
To Next Page
Loading...
Need help?
General
