43
Menu functions
Workflow
Request to typist, worktype, group*, category* priority and number/•
reference activation by pressing the NEW-button for a new dictation
Device settings
Sleep mode: Select the time when the energy saving, non-operative •
state shall be activated automatically. The Digta will switch off com-
pletely after 30 minutes.
Audio signals: On-/Off-switching of audio signals•
USB connecting: Automatically USB connecting or after having •
selected it in the menu
Loudspeaker: Switch off the loudspeakers for play-back with head-•
phones in the Digta Station*
Forward-/rewind: Change the forward/rewind speed. Switching on/off •
fragmented play-back
Rechargeable batteries: Switching over from battery to external •
charged NiMH-rechargeable battery
Foot control: Selection of foot control functions for recording or play-•
back and changing the operation time of short backspace (only avail-
able in combination with Digta Station*)
Change PIN: Change personal identification number (PIN)•
Play-back with OK: Switching on/off the Play-back function for the •
“OK” display button
Reset: Reset dictation counter to “1”, format memory and reset of •
device settings
Device info
Version: Information about serial number and firmware-version•
License key: License key of the activated functions•
Disk: Information about the memory capacity of the internal or exter-•
nal memories
USB-operations5.2
With the “USB-operations” function you can manually set up a USB
connection.
Press “ x MENU”.
Move to the “ x USB-operations” menu item using the up/down but-
tons.
Confirm by pressing „ x OK“ to set up the USB connection.
5.3 Data list
The “data list” function is not available in the WAV* and MP3* record-
ing formats.
With the “data list”* function, dictations and text entries can be saved to
an ID (e.g. patient or client number or scanned barcode).
These text entries are created on a PC in CSV format (comma-separated
values), using Excel for instance. After you have saved the file under the
name “ids.csv”, transfer the data into the Digta system folder (see “Per-
“Data list” menu
To Next Page
Loading...
