61
Menu functions
5 min•
15 min•
30 min•
Never•
Activate the selected option by pressing “ x OK”.
The marker bullet moves to the highlighted bar.
Confirm the change using “ x Save”.
If you do not wish to save the change, press the “ x Escape” button.
Acoustic signals
In the “Acoustic signals” menu, you can switch on/off the signals you
find bothersome.
Press “ x MENU”.
Use the up/down buttons to navigate to the “ x Device settings” menu
item and confirm using “OK”.
Select the “ x Acoustic signals” subitem using the up/down buttons.
Confirm your selection using “OK”.
Move to the desired option using the up/down buttons. x
Acknowledge beeps•
Warning beeps•
Notification beeps•
Activate or deactivate the desired acoustic signal by pressing “ x OK”.
The check mark after the function appears or disappears. The
acoustic signal is activated or deactivated.
Confirm the change using “ x Save”.
If you do not wish to save the change, press x “Escape”.
If all signals are switched off, no signal sounds when the memory is
full or the rechargeable battery* is empty. In this case, if you dictate
without paying attention to the screen the device may switch off with-
out a signal sounding. You may continue to dictate and the text will
not be recorded.
If only the warning signals are switched on, no notification signals will
sound, for example the standby signal after the device is switched on
or the info and index signals.
USB connection
You can choose whether the dictation machine automatically switches
to USB mode when a USB connection to a PC is established or whether
you would prefer to activate this function manually from the menu.
Press “ x MENU”.
Use the up/down buttons to navigate to the “ x Device settings” menu
item and confirm using “OK”.
Acoustic signals absent
To Next Page
Loading...
Need help?
General
