GW Instek LCR Series - Display Subsystem; Disp:line; Disp:page; Figure ‎ 1 1-2 Command Tree Example

Command Reference
98
11.6 DISPlay Subsystem
The DISP Subsystem command group sets the display
page.
Figure 11-2 Command Tree Example
11.6.1 DISP:LINE
The :LINE command enters an arbitrary comment line of up to 30 ASCII
characters in the comment field.
Command Syntax
DISP:LINE “<string>”
Parameter
Where, <string> is ASCII character string (30 ASCII
characters)
Example
SEND> DISP:LINE “This is a comment.”
11.6.2 DISP:PAGE
The :PAGE command sets the display page.
The :PAGE? Query returns the abbreviated page name currently displayed on
the LCD screen.
Command Syntax
DISP:PAGE <page name>
Parameter
Where, <page name> is:
MEASurement [or MEAS] Sets the display page to
MEAS DISPLAY.
ENLARGE[or ENLA] Sets the display page to
ENLARGE DISPLAY.
BINMEAS [or BINM] Sets the display page to BIN
MEAS.
BINCOUNT [or BCO] Sets the display page to BIN
All manuals and user guides at all-guides.com