GW Instek LCR Series - Comparator:mode; Comparator:aux; Comparator:bins

Command Reference
112
11.11.2 COMParator:MODE
The :COMParator:MODE command sets the limit mode of the comparator
function.
Command
Syntax
COMParator:MODE {ABS,PER,SEQ}
Parameter
Where,{ABS,PER,SEQ} is:
ABS Absolute tolerance mode
PER Percent tolerance mode
SEQ Sequential mode
Example
SEND> COMP:MODE PER<NL>
Query Syntax
COMParator:MODE?
Query Response
{abs,per,seq}
Example
SEND> COMP:MODE?<NL>
RET> abs<NL>
11.11.3 COMParator:AUX
The COMParator:AUX command sets the auxiliary BIN counting function of
the comparator to ON or OFF.
Command
Syntax
COMParator:AUX {ON,OFF,1,0}
Parameter
Where,{ON,OFF,1,0} is:
ON or 1 Set the AUX BIN to ON
OFF or 0 Set the AUX BIN to OFF
Example
SEND> COMP:AUX OFF<NL>
Query Syntax
COMParator:AUX?
Query Response
{on,off}
Example
SEND> COMP:AUX?<NL>
RET> on<NL>
11.11.4 COMParator:BINS
The COMParator:BINS command sets the total number of bins.
Command
Syntax
COMParator:BINS <value>
Parameter
Where,{value} is:
NR1 (1 to 9)
Example
SEND> COMP:BINS 3<NL>
Query Syntax
COMParator:BINS?
Query Response
<NR1> (1 to 9)
Example
SEND> COMP:BINS?<NL>
RET> 3<NL>
All manuals and user guides at all-guides.com
all-guides.com