GW Instek LCR Series - Comparator Subsystem; Comparator:state

LCR-6000 Series User Manual
111
11.11 COMParator Subsystem
The COMParator subsystem command group sets the comparator function,
including its ON/OFF setting, limit mode, and limit values.
Figure 11-8 COMParator Subsystem Command Tree
11.11.1 COMParator:STATe
The COMParator:STATe command sets the comparator function to ON or
OFF.
Command
Syntax
COMParator:STATe {ON,OFF,1,0}
Parameter
Where,
ON or 1 Sets the comparator to ON
OFF or 0 Sets the comparator to OFF
Example
SEND> COMP:STAT OFF<NL>
Query Syntax
COMParator:STATe?
Query Response
{on,off}
Example
SEND> COMP:STAT?<NL>
RET> on<NL>
COMParator
:STAT e
:MODE
:TOLerance
:SECONDARY(SLIM)
{ON,OFF}
{ABS,PER,SEQ}
:NOMinal
:BIN
<value>
<low>,<high>
:AUX {ON,OFF}
:BINS {1 to 9}
<n,low,high>
:BEEP {OFF,PASS,FAIL}
:OPEN {OFF,2,5,10,20,50}
All manuals and user guides at all-guides.com