GW Instek LCR Series User Guide

Command Reference
118
pass/fail<NL> //Finish or Undone
11.13.2 CORRection:OPEN:STATe
The CORRection:OPEN:STATe command sets the OPEN correction
function to ON or OFF.
Command
Syntax
CORRection:OPEN:STATe {ON,OFF or 1,0}
Parameter
ON, 1 Set up the function is ON
OFF,0 Set up the function is OFF
Example
SEND> CORR:OPEN:STATe ON<NL>
RET> null
Query Syntax
CORRection:OPEN:STATe?
Query Response
{on,off}
Example
SEND> CORR:OPEN:STATe?<NL>
RET> on<NL>
11.13.3 CORRection:OPEN:LCR
The CORRection:OPEN:LCR command execute all preset OPEN correction
data measurement points (AC).
Command
Syntax
CORRection:OPEN:LCR
Example
SEND> CORRection:OPEN:LCR<NL>
RET> LCR open<NL> // Run
pass/fail<NL> //Finish or Undone
11.13.4 CORRection:OPEN:DCR
The CORRection:OPEN:DCR command execute all preset OPEN correction
data measurement points (DC).
Command
Syntax
CORRection:OPEN:DCR
Example
SEND> CORRection:OPEN:DCR<NL>
RET> DCR open<NL> // Run
pass/fail<NL> //Finish or Undone
11.13.5 CORRection:SHORt
The CORRection:SHORt command execute all preset SHORT correction
data measurement points.
Command
Syntax
CORRection:SHORt
Example
SEND> CORRection:SHOR<NL>
RET> short<NL>
All manuals and user guides at all-guides.com

GW Instek LCR Series Specifications

General

Brand	GW Instek
Model	LCR Series
Category	Measuring Instruments
Language	English