GW Instek LCR Series - 4 Measure Key; MEAS DISPLAY] Page

Measure Key
24
4. MEASURE KEY
This section includes the following information:
 MEAS DISPLAY page
 OPEN/SHORT page
 LIST SETUP page
 LIST MEAS page
4.1 [MEAS DISPLAY] Page
When the [Measure] key is pressed, the
[MEAS DISPLAY] page appears. The following
measurement controls can be set.
 FUNC – Measurement Function
 RANGE – Impedance range
 FREQ – Test Frequency
 TRIG – Trigger Mode
 LEVEL – Test Signal Level
 SPEED – Meas Speed
All manuals and user guides at all-guides.com