GW Instek LCR Series - Setting func

System Configurations
68
6. SYSTEM
CONFIGURATIONS
This section includes the following information:
 SYSTEM CONFIG page
 SYSTEM INFO page
 SYSTEM SERVICE page
6.1 [SYSTEM CONFIG] Page
When the [Measure] or [Setup] key is pressed, followed
by the [SYSTEM] bottom soft-key, the
[SYSTEM CONFIG] page appears.
The following information can be configured in the
[SYSTEM CONFIG] page.
 System Information
 System date and time configuration [DATE/TIME]
 Account settings [ACCOUNT]
 Key Beep setting [Key BEEP]
 RS-232 Baud rate setting [BAUD]
 [HAND SHAKE]
 [ERROR CODE]
 [RESULT]
 [DATA BUFFER]
 [DEFAULT SET]
All manuals and user guides at all-guides.com