GW Instek LCR Series User Guide

Command Reference
114
A suffix multiplier can be used with this command.
Example
SEND> COMP:SLIM 0.0001,0.0010<NL>
Query Syntax
COMParator:SLIM?
COMParator:secondary?
Query Response
<NR3:low limit>,<NR3:high limit>
Example
SEND> COMP:SLIM?<NL>
RET> 1.00000e-04,1.00000e-03<NL>
11.11.8 COMParator:BEEP
The :COMParator:BEEP command sets beep mode of the comparator
function.
Command
Syntax
COMParator:BEEP {OFF,PASS,FAIL}
Parameter
Where,
OFF Turns the beeper off.
PASS Sounds a beep when the test is passed
(BIN1~BIN9).
FAIL Sounds a beep when the test is failed (OUT).
Example
SEND> COMP:BEEP PASS<NL>
Query Syntax
COMParator:BEEP?
Query Response
{OFF,PASS,FAIL}
Example
SEND> COMP:BEEP?<NL>
RET> OFF<NL>
11.11.9 COMParator:OPEN
The :COMParator:OPEN command selects the open condition for main
parameter.
Command
Syntax
COMParator:OPEN {OFF,2,5,10,20,50}
Parameter
Where,
OFF Turns the beeper off.
2,5,10,20,50 The percent range value
Example
SEND> COMP:OPEN 2<NL>
Query Syntax
COMParator:OPEN?
Query Response
{OFF,2,5,10,20,50}
Example
SEND> COMP:OPEN?<NL>
RET> OFF<NL>
All manuals and user guides at all-guides.com

GW Instek LCR Series Specifications

General

Brand	GW Instek
Model	LCR Series
Category	Measuring Instruments
Language	English