GW Instek LCR Series User Guide

UNPACKING AND PREPERATION
12
Note
If an abnormality is detected, contact the company and
transport the meter to your nearest GW INSTEK
Instruments sales or service office. Save the packing box,
shock-absorbing material, and packaged items as you
received them in case you need to mail the instrument to
an authorized GW Instek distributor or service center.
1.2 Environmental Requirements
Set up the LCR-6000 Series where the following
environmental requirements are satisfied.
Operating Environment
Ensure that the operating environment meets the
following requirements:
Temperature:
0ºC to 50ºC
Temperature range
at calibration:
23ºC± 5ºC (<1ºC deviation from the
temperature when performing
calibration)
Humidity:
<70% at wet bulb temperature
≤40ºC (non-condensation)
Altitude:
0 to 2000m
1.3 Cleaning
To prevent electrical shock, disconnect the LCR-6000
Series power cable from the receptacle before cleaning.
Use a dry cloth or a cloth slightly dipped in water to clean
the casing. Do not attempt to clean the LCR-6000 Series
internally.
WARNING
Don’t Use Organic Solvents (such as alcohol or
gasoline) to clean the Instrument.
All manuals and user guides at all-guides.com
all-guides.com

GW Instek LCR Series Specifications

General

Brand	GW Instek
Model	LCR Series
Category	Measuring Instruments
Language	English