GW Instek LCR Series - Trigger Mode; Basic Accuracy; Display Range; Test Signal

Overview
16
NOTE
*1. Measurement speed in 300kHz, typical.
2.2.5 Trigger Mode
Includes Internal, Manual, External and Bus Trigger.
2.2.6 Basic Accuracy
0.05%@SLOW/MED
0.1%@FAST
2.2.7 Display Range
Table 2-2 Display Range
Parameter
Display Range
L
0.00001uH ~ 9999.99H
C
0.00001pF ~ 9999.99mF
R, X, |Z|
0.00001Ω ~ 99.9999MΩ
G, B, |Y|
0.01nS ~ 999.999S
D
0.00001 ~ 9.99999
Q
0.00001 ~ 99999.9
θd
-179.999° ~ 179.999°
θr
-3.14159 ~ 3.14159
DCR
0.00001Ω ~ 99.9999MΩ
Δ%
-999999% ~ 999999%
2.3 Test Signal
2.3.1 Test Signal Frequency
LCR-6300: 10Hz～300kHz
LCR-6200: 10Hz～200kHz
LCR-6100: 10Hz～100kHz
LCR-6020: 10Hz～20kHz
LCR-6002: 10Hz～2kHz
Frequency Accuracy: ± 0.01%
All manuals and user guides at all-guides.com